Concrete polish is a special coating material used to beautify, protect and increase the durability of concrete surfaces. Thanks to the special components it contains, it protects concrete against external factors, prevents dusting, provides waterproofing properties and provides a shiny appearance. Concrete polishes can be used both indoors and outdoors, on new or old concrete surfaces. In this way, concrete floors have a longer life, are easy to clean and have an aesthetic appearance.
Concrete Polish Betolac
Concrete polish Betolac is a one-component, transparent aliphatic polyurethane coating specially formulated for the long-lasting protection of your concrete surfaces. Thanks to its superior UV resistance, it is fade resistant and adds an aesthetic elegance to your concrete with a wet look. With its high mechanical strength, dust repellency, water and stain resistance, it extends the life of concrete and facilitates its maintenance. It is an ideal solution for your concrete floors, terraces or decorative concrete applications.
Product Features
- Penetrates deeply, strengthens concrete and provides long-lasting protection.
- It is resistant to all weather conditions and protects the surface from the harmful effects of the sun.
- It repels water completely, preventing moisture formation on the surface.
- It extends the life of concrete and increases its resistance to abrasion.
- It gives a shiny and wet look and the surface can be easily cleaned.
Application Areas
It can be used safely on all high-strength concrete surfaces, production areas of industrial production facilities, outdoor concrete floors and indoor and outdoor parking lots.
Surface Preparation
Before application, the concrete surface must be thoroughly cleaned of oil, dirt, rust, dust and all other residues. If necessary, old and new concrete surfaces can be subjected to additional polishing with special diamond bits and polishing pads.
Application Instruction
- Ready for use. Depending on the absorbency of the concrete, the application should be continued until a film forms on the surface.
- Not recommended for use on non-absorbent surfaces.
- Wait at least 2 hours between coats.
- The full performance of the product must be tested after at least 72 hours. Good ventilation must be ensured in enclosed areas.
- Do not smoke or inhale solvent vapors during application.
Technical Specifications and Performance Ratings
Color: Transparent
Appearance Glossy
Thinner Ready to use
Density: 0.95 gr/cm³
Application Methods: Brush, roller, airless gun
Consumption 100 gr – 150 gr /m².
Packaging: 4 kg, 15 kg cans
Drying Time: 24 hours for complete drying
Equipment Cleaning: Cellulosic Thinner
Flash Point >25 °C
Application Visuals
