DERZ AQUA Flexible Joint Filler
Cement-based, reinforced with special hydrophobic polymer and silicone additives, CG2WA class, flexible joint filler suitable for 1-12 mm joint gaps.
Advantages
- Easy to prepare and apply.
- High compressive and abrasion resistance.
- Waterproof.
- High resistance to staining and cracking.
- Good adhesion to applied surfaces. Provides a smooth finish.
- Resistant to freeze-thaw cycles.
Application Areas
Used in indoor and outdoor areas on ceramic, granite, tile, glass mosaic, marble, and natural stone coverings; suitable for wet areas such as pools and water tanks, high pedestrian traffic zones, and underfloor heating systems.
Application Features
- DryFiX Derz Aqua joint filler is slowly added to 6.00 – 6.60 liters of water and mixed with a mixer for 2-3 minutes. After resting for 5 minutes, it is mixed again for 1-2 minutes.
- The prepared mixture should be used within 30 minutes.
- The grout is applied into joint gaps using a rubber trowel and excess material is scraped off.
- Depending on weather conditions, clean the surface gently with a damp sponge after approximately 15-20 minutes without applying pressure.
Warnings and Recommendations
- Before application, dust, debris, and construction cement residues must be cleaned from joint gaps.
- Pre-moisten the joints with a sponge before application.
- Ensure that coverings have been applied at least 24 hours prior and that the ceramic adhesive has cured.
- Not suitable for application on metal surfaces.
- No foreign materials should be added.
Storage
| Packaging | 20 kg Kraft Bag |
| Color | White |
| Shelf Life | 12 Months |
Consumption
Consumption varies between 100 – 800 g/m² depending on joint width and tile size.
Technical Specifications and Performance Values
| Color | White |
| Water Ratio | 6.00-6.80 liters / 20 kg |
| Service Opening Time | Min. 24 hours |
| Pot Life | Max. 30 minutes |
| Flexural Strength | ≥2.5 N/mm² |
| Compressive Strength | ≥15 N/mm² |
| Water Absorption 30 min / 240 min | ≤ 2 g / ≤ 5 g |
| Shrinkage Coefficient | ≤ 3 mm/m |
| Abrasion Resistance | < 1000 mm³ |
Would You Like Us to Call You?
\
Comments
