trendear

Epoxy Adhesive DFR – 1000

Epoxy Adhesive DFR – 1000
Epoxy Adhesive DFR – 1000

Two-component, solvent-free, thixotropic epoxy adhesive.

Application Areas of Epoxy Adhesive DFR – 1000

Used for bonding plasterboard and betopan panels, styrofoam, sheets, OSB, wood, chipboard, rubber, and stone, as well as filling hairline cracks in concrete.

Product Features of Epoxy Adhesive DFR – 1000

Color: Gray
Solid Content by Weight, %: 100
Density: 1.75 g/cm³
Packaging: 4 kg Component A + 2 kg Component B: Total 6 kg
Flash Point: >105 °C
Mixing Ratio: By weight; 2 / 1
Pot Life: 20 minutes / 25°C
Shelf Life: 1 year
Recoat Time: 12 hours / 25°C / 24 hours / 25°C
Drying Time: 12 hours / 25°C
Mechanical Strength: 7 days
Equipment Cleaning: Epoxy Thinner

Application Instructions

SURFACE PREPARATION
* Surfaces to be applied must be free from oil, dust, and dirt.
* Loose particles and anything that would prevent adhesion should be removed.
* Surface roughening should be done where necessary.

MIXING PREPARATION
Components A and B should be mixed in the correct proportions using a low-speed mixer for at least 3-4 minutes until homogeneous. For small-scale bonding, the A/B ratio of 2/1 by weight should be measured with a scale and mixed with a spatula.

COATING SYSTEM
After priming with DFC-100, DFC-300 is applied as an intermediate coat. The consumption of primer, sandblasting, and intermediate coat varies depending on the desired final coating thickness. After 24 hours, DFC-400 is spread evenly with a flat trowel and textured using a coral-patterned roller.

APPLICATION CONDITIONS
* Surfaces must have sufficient strength.
* Surfaces must be clean, smooth, and dry.
* Avoid application below 10°C and in very humid conditions.
* Mixing ratios must be followed.

SAFETY
This product is for professional use. Read the safety warnings on the packaging before use. Refer to the Material Safety Data Sheet if necessary. Avoid inhalation, skin and eye contact, and ingestion. Use appropriate personal protective equipment. Take precautions to prevent fire, explosion, and environmental contamination. Apply in well-ventilated areas.

TRANSPORT AND STORAGE
* Store the product between 5-35°C.
* Keep away from direct sunlight.
* Store opened product in its original container with the lid tightly closed. Use opened product within one week.

Would You Like Us to Call You?

    Privacy Policy

    Comments

    No comments yet. You can be the first filling the form below.

    Whatsapp
    DryFix
    DryFix
    Hızlı yanıt için hazırız.
    Size nasıl yardımcı olabiliriz?

    Ürün uzmanı müşteri temsilcilerimizle görüşme başlatın.
    "İhtiyaçlarınıza özel çözümler" sunmak istiyoruz.
    Bize yazın!
    1