Two-component, solvent-free epoxy resin based, filled, thixotropic epoxy primer
Used as a primer on concrete surfaces such as storage tanks, water pipes, waste channels, and industrial facility walls. Suitable for vertical surfaces.
Color: Gray
Appearance: Semi-Gloss
Solid Content by Weight, %: 100
Density: 1.65 g/cm³
Consumption: 300 – 500 kg / m2
Packaging: 17.5 kg Component A + 2.5 kg Component B: Total 20 kg
Flash Point: >50 °C
Mixing Ratio: 7/1
Application Methods: Brush, Roller
Pot Life: 30 minutes / 25°C
Shelf Life: 1 year
Waiting Time Between Coats: 24 hours / 25°C
Drying Time: 24 hours / 25°C
Mechanical Strength: 7 days
Shore D Hardness: 75 (7 days / 25°C)
Equipment Cleaning: Epoxy Thinner
SURFACE PREPARATION
Surfaces must be free of oil, dust, and dirt. Any paint flakes, oil residues, frost, dust, shavings or similar substances that may prevent adhesion must be cleaned.
MIXING PREPARATION
Surfaces must be free of oil, dust, and dirt. Any paint flakes, oil residues, frost, dust, shavings or similar substances that may prevent adhesion must be cleaned.
COATING SYSTEM
Painting can begin 24 hours after priming. Multiple coats can be applied depending on the desired thickness.
APPLICATION CONDITIONS
Concrete surfaces to be coated with epoxy primer must have a compressive strength of at least 25 N/mm² and tensile strength of at least 1.5 N/mm². On highly absorbent surfaces, primer coats should be applied repeatedly until the surface is sufficiently saturated. Even after curing, if moisture or water pressure comes from the ground, the epoxy primer and coating may be damaged. Avoid application below 10°C and in very humid environments.
SAFETY
This product is for professional use only. Pay attention to safety warnings on the packaging before use and consult the Material Safety Data Sheet if necessary. Avoid inhalation, skin, and eye contact; do not ingest. Use appropriate personal protective equipment. Take necessary precautions against fire, explosion, and environmental contamination. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* Store product between 5-35°C.
* Protect from direct sunlight.
* Store opened product in its own packaging with the lid tightly closed.
