CER 606 Cement-Based Ceramic Adhesive
Cement-based, reduced slip, extended open time, high-performance C2TE class tile and ceramic adhesive mortar.
Advantages
- Offers economical and easy application.
- Does not sag in vertical applications.
- Has long working time and high adhesion performance.
Application Areas
Used indoors and outdoors on cement-based surfaces such as plaster and wall screed, for applying large-format ceramic, tile, porcelain, granite, and marble coverings.
Application Features
- Mix a 25 kg bag with 6.25-6.75 liters of clean water, slowly adding water while mixing at low speed for 2-3 minutes until homogeneous.
- Let rest for 5 minutes, then mix again for 1-2 minutes before use.
Warnings and Recommendations
- The surface must be dry, clean, and sound.
- Cracks, weak, and damaged areas must be repaired at least 24 hours before application.
- Application temperature and the following 24 hours must be between +5°C and +35°C.
- Avoid application on frozen surfaces, under windy conditions, or if freezing is expected within 24 hours.
Storage
| Packaging | 25 kg Kraft Bag |
| Color | Gray |
| Shelf Life | 12 months if stored unopened in dry, moisture-free conditions. Bags must be tightly sealed if unused. Protect from frost and sunlight. |
Consumption
4.00 – 6.00 kg/m²
Technical Specifications and Performance Values
| Product Structure | Cement-Based Powder |
| Color | Gray and White |
| Water Mixing Ratio | 6.25-6.75 liters water / 25 kg |
| Consumption | 4-6 kg/m² |
| Reference Standard | TS EN 12004:2017 |
| Initial Tensile Adhesion Strength | ≥ 1 N/mm² |
| Tensile Adhesion Strength After Water Immersion | ≥ 1 N/mm² |
| Tensile Adhesion Strength After Heat Aging | ≥ 1 N/mm² |
| Tensile Adhesion Strength After Freeze-Thaw Cycles | ≥ 1 N/mm² |
| Open Time Tensile Adhesion Strength (After 20 Minutes) | ≥ 0.5 N/mm² |
| Slip Resistance | ≥ 0.5 N/mm² |
| Reaction to Fire Class | A1 |
| Pot Life | 2-3 Hours |
| Working Time | Maximum 30 Minutes |
| Walkable Time | 24 Hours |
Specified times apply at 20°C surface and ambient temperature. Times increase at lower temperatures and decrease at higher temperatures. DryFiX is not responsible for application errors due to misuse or non-compliance with recommended conditions.
Would You Like Us to Call You?
\
Comments
