FRONT ECO Exterior Paint
Due to its special acrylic emulsion-based structure, it has excellent adhesion, spreading, covering and ease of application. Its inhalation feature allows the moisture in the wall to be expelled.
Application Areas
All concrete surfaces, plastered surfaces, aerated concrete, brick, briquette, chipboard, etc. It is used on the properly prepared surfaces of building elements by performing the necessary priming process.
Application Features
The surfaces to be applied are absolutely not damp, completely cleaned from dirt, oil, blistered old paints and the cracks, pits and defects in the plaster are corrected with Wall Putty. Then the surface should be prepared for the top coat with DryFIX START-UP Exterior Primer. 24 hours after the primer application, DryFIX FRONT ECO thinned by 10-20% by volume with water is applied in 2 coats. Wait at least 12 hours between coats. When applying dark colors, it is recommended not to dilute with more than 5% water. It is applied with brush, exterior roller. If it will be applied with a paint gun, with 150-250 bar; Nozzle: 0,015-0,021 in.
Physical Properties
- Density: (25°C, gr/cm³): 1,570-1,625
- Drying Times: (20°C):
- Powder Drying 30 Minutes
- Touch Dry 1-2 Hours
- Full Drying 72 Hours
- Solid Matter % (by weight): 66-70
- Viscosity (25°C): kreps unit: 140±2:
- pH (25°C): 8-9,2
- Crush: 60 μ
Consumption
6-8m² with 1 liter (single coat)
Storage
| Packaging | 20 kg = 12.5 liters |
| Color | It can be made in catalog colors or in a desired color. |
| Shelf Life | It can be stored in its original unopened buckets in dry conditions at temperatures between 5°C and 25°C for a minimum of 12 months. |
