Epoxy Putty DFR 2000

Used for filling deep and large cracks in concrete, leveling concrete, walls, and ceilings, bonding loose parts, fixing anchoring elements on vertical surfaces, bonding metal, steel, and concrete components, bonding expansion joints, and rebar anchoring. Solvent-free. Does not sag on vertical surfaces. High chemical resistance and mechanical strength. Easily adheres to steel during rebar anchoring and provides anti-corrosive protection.

Color: Gray
Appearance: Matte
Solid Content by Weight, %: 100
Density: 1.85 g/cm³
Packaging: 4.50 kg Component A + 1.50 kg Component B = Total 6 kg
Mixing Ratio: 3.Oca
Application Methods: Spatula, Trowel
Pot Life: 20 minutes / 25°C
Shelf Life: 1 year
Drying Time: 12 hours / 25°C
Flexural Strength: Min. 30-40 N/mm² at 20°C (10 days)
Elasticity Modulus: 4.3 N/mm²
Adhesion Strength (to steel): 15 N/mm² (10 days)
Adhesion Strength (to concrete): 4 N/mm² (10 days)
Compressive Strength: Min. 60-70 N/mm² at 20°C (10 days)

Surface Preparation: All loose particles and paint residues must be completely removed. Repairs should be made to cracks and damages. Surfaces should be roughened and vacuum cleaned from dust, oil, and dirt. Steel surfaces should be free of rust. Anchor holes must be cleaned with compressed air during rebar anchoring.

Mixing Preparation: Components A and B should be mixed according to mixing ratios with a spatula, trowel, or low-speed mixer for at least 3-4 minutes until homogeneous. The mixture is ready for application.

Application Conditions: Surfaces must have sufficient strength. Concrete compressive strength should be at least 25 N/mm², tensile strength at least 1.5 N/mm².
Avoid application below 5°C and in very humid environments.
Mixing ratios must be followed carefully.

Consumption varies depending on the application area.
COLOR: Gray
STORAGE CONDITIONS: Store unopened in a dry and cool place in original packaging.
SHELF LIFE: 12 months
PACKAGING: 6 kg / set Metal Container