Thermal Paint Thermal 100

DryFiX THERMAL 100, with its high UV resistance, can be safely used not only on building exteriors but also on all plastered and painted surfaces. It gives your building a modern look and wraps it with a durable protective layer.

Exterior Coating Application Areas

Dryfix Thermal Paint Thermal 100 is suitable for use on all plastered and painted surfaces of your building.

THERMAL 100 Features

Thanks to its elasticity, it bridges hairline cracks. It protects the exterior against ground movements and expansions. It does not add significant load to your building, and since it is applied without dowels, it does not damage your walls.

It has high fire resistance. It is water-based, contains no petroleum products, and is odorless. Repairs to damages during usage are easy and economical. Its waterproof structure prevents water leakage on façades and its breathability prevents moisture and dampness on interior walls.

Application Instructions

The surface to be applied must be free from dirt, dust, oil, and peeling residues, and must be clean and dry. To strengthen Thermal 100 application and increase durability, the surface should be primed with a single coat of DryFiX THERMAL PRIMER. DryFiX THERMAL PRIMER is ready to use and must not be diluted. After a drying time of 4 hours for the primer, apply Thermal 100 with brush and roller in 2 coats or until a thickness of at least 1-1.5 mm is achieved for full efficiency. Allow a minimum of 4 hours between coats. Neither DryFiX THERMAL 100 nor THERMAL PRIMER should be diluted with water.

CONSUMPTION 1 lt/m² (for 1 mm thickness)

COLOR Standard white (can be produced in desired colors)

STORAGE CONDITIONS Store unopened in original packaging in a dry and cool place.

SHELF LIFE 12 months

PACKAGING 18 lt PE bucket