Two-component, aliphatic polyurethane based protective semi-matte paint
Used as a thin coat on epoxy primers saturated on floors where UV resistance is required, and as a semi-matte protective topcoat on epoxy and polyurethane coatings.
Color: RAL colors
Appearance: Semi-Matte
Thinner: DFPUR 355
Solid Content by Weight, %: 60
Density: 1.30 g/cm³
Consumption: 0.100-0.150 kg / m²
Packaging: 18 kg Component A + 2 kg Component B: Total 20 kg
Flash Point: >25 °C
Mixing Ratio: 09.Jan
Application Methods: Brush, Roller, Airless Spray
Pot Life: 1 hour / 25°C
Shelf Life: 1 year
Waiting Time Between Coats: 6 hours / 25 °C
Drying Time: 12 hours / 25 °C
Mechanical Strength: 7 days
Equipment Cleaning: Polyurethane Thinner
SURFACE PREPARATION
Surfaces to be coated must be free from oil, dust, and dirt. If more than 24 hours have passed since the epoxy primer or coating beneath DFPUR-150 was applied, the surface must be roughened using a sanding machine.
MIXING PREPARATION
Components A and B should be mixed in the correct ratios using a low-speed mixer for at least 3-4 minutes until a homogeneous mixture is obtained. The mixture is then ready for application.
APPLICATION CONDITIONS
Concrete surfaces for epoxy primer application should have a compressive strength of at least 25 N/mm² and tensile strength of at least 1.5 N/mm². On highly absorbent surfaces, continue applying primer coats until the surface reaches sufficient saturation. Even after curing, if pressurized moisture or water comes from the substrate, damage to the epoxy primer and coating is possible. Avoid application below 5°C and when relative humidity exceeds 70%. For applications above 30°C, use DFPUR-200, which has a longer drying time. Wearing spiked shoes during application over epoxy or polyurethane coatings may cause holes and penetration to the topcoat.
SAFETY
This product is for professional use only. Read the safety warnings on the packaging before use and consult the Material Safety Data Sheet if necessary. Avoid inhalation, skin, and eye contact; do not ingest. Use appropriate personal protective equipment. Take precautions against fire, explosion, and environmental contamination. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* Store product between 5-35°C.
* Protect from direct sunlight.
* Store opened product in its original packaging with the lid tightly closed; opened product should be used within one week.
