Anti Slip Floor Paint

Dryfix Anti-Slip Paint is designed for floors where slip resistance is essential for improving pedestrian safety. Its special mineral aggregate formulation creates a textured, high-friction surface suitable for both indoor and outdoor applications.

Typical application areas include:

• Industrial floors and factory production areas
• Swimming pool surrounds and pool edges
• Stairways and stair treads
• Pedestrian walkways and footpaths
• Access ramps and inclined surfaces
• Bus stops and public transport areas
• Pedestrian crossings
• Other floors exposed to frequent foot traffic or slippery conditions

Dryfix Anti-Slip Paint can be applied to various properly prepared floor surfaces, including ceramic tiles, porcelain tiles, granite, concrete, marble, iron and wood.

Features and Advantages of Dryfix Anti-Slip Paint

• High Slip Resistance: Special mineral aggregates create a textured surface with increased friction, helping to reduce the risk of slipping.
• Three-Component Formulation: Combines three components to provide a specialised anti-slip floor coating.
• Durable Surface: Forms a resistant coating suitable for areas exposed to regular pedestrian traffic.
• Wide Application Range: Suitable for concrete, ceramic, tiles, granite, marble, metal and wood surfaces.
• Improved Floor Safety: Helps create safer walking surfaces in areas exposed to moisture and slippery conditions.
• Customisable Colours: Available in standard white, with other colours available on request.
• Easy Application: Can be applied using a suitable brush or roller.

Application Instructions for Dryfix Anti-Slip Paint

Surface Preparation

Surfaces to be treated with Dryfix Anti-Slip Paint must be clean, dry and free from dust, dirt, oil, grease and other contaminants that could impair adhesion.

Existing paint layers, oil residues and other materials that may prevent proper bonding must be removed. The surface should be mechanically abraded using suitable abrasive tools, angle grinders or grinding machines to create an appropriate bonding profile.

The product can be applied directly to clean, dry and properly prepared surfaces.

Preparation of the Mixture

Pour all three components (A, B and C) into a clean mixing container.

Mix thoroughly using a mechanical mixer for approximately 2–3 minutes until a homogeneous mixture is obtained.

Application

Apply Dryfix Anti-Slip Paint evenly using a suitable brush or roller in two coats.

Allow at least 2 hours between coats before applying the next layer.

During application, stir the prepared mixture frequently to prevent the mineral aggregates from settling and to ensure an even distribution throughout the coating.

The application surface temperature must be between +5°C and +30°C.

Consumption

• Coverage: Approximately 8–10 m² per set.
• Application: 2 coats.

Actual coverage may vary depending on substrate condition, surface texture and application method.

Colour

Standard colour: White.

Other colours can be produced upon request.

Storage Conditions

Store in its original, unopened packaging in a cool and dry place. Protect the product from moisture and unsuitable storage conditions.

Shelf Life

The shelf life is 12 months from the date of manufacture when stored in its original, unopened packaging under the recommended storage conditions.

Packaging

6 kg/set – Metal Can