CLASSIC Cement Based Thin Plaster
Cement-based thin plaster material applied on rough plaster for interior and exterior walls.
Advantages
- Easy and fast to apply.
- High adhesion to applied surface.
- Provides a homogeneous rough surface.
- Resistant to outdoor climate conditions.
- Offers a uniform texture.
Application Areas
Used on all cement-based surfaces indoors and outdoors to create smooth surfaces after rough plaster.
Application Features
- Dryfix CLASSIC thin plaster should be slowly added to 5.50-6.00 liters of clean water and mixed with a low-speed mixer for 2-3 minutes until homogeneous.
- After resting for 5 minutes, stir again for 1-2 minutes and it will be ready to use.
Warnings and Recommendations
- The surface must be dry, clean, and solid before application.
- Cracks, weak or damaged areas on the application surface should be repaired at least 24 hours before application.
- The temperature during and for 24 hours after application should be between +5°C and +35°C.
- Avoid application under windy conditions, on frozen surfaces, or if freezing is expected within 24 hours.
Storage
| Packaging | 20 kg Kraft Bag |
| Color | Gray |
| Shelf Life | 12 months if stored unopened in dry and moisture-free environments. The bag must be tightly sealed if not in use. Protect from frost and sunlight. |
Consumption
1.4-1.6 kg/m² per 1 mm thickness
Technical Specifications and Performance Values
| Product Structure | Cement-Based Powder |
| Color | Gray |
| Water Mixing Ratio | 5.60-6.00 liters water / 25 kg |
| Reference Standard | TS EN 998-1 |
| Compressive Strength | CS IV ≥ 6 N/mm² |
| Bond Strength | ≥0.4 N/mm² |
| Bulk Density of Hardened Mortar | 1,500 kg/m³ (±200) |
| Capillary Water Absorption and Permeability | WO |
| Water Vapor Permeability (µ) | ≤25 |
| Reaction to Fire Class | A1 |
Would You Like Us to Call You?
Our team will contact you as soon as possible to offer the most suitable solution for your needs.
PHONE
+90 850 777 05 35
WHATSAPP
+90 850 777 05 35