DERZ PLUS (CG1) Reinforced Joint Sealant - DryFiX Yalıtım

DERZ PLUS Cement-Based Joint Filler

Cement-based, reinforced with special hydrophobic polymer, CG1 class joint filler suitable for 1-6 mm joint gaps.

Used indoors for joint filling up to 6 mm wide on ceramic, granite, tile, marble, and natural stone coverings.

Slowly add DryFiX DERZ PLUS joint filler into 6.75-7.25 liters of water and mix with a mixer for 2-3 minutes. Let rest for 5 minutes, then mix again for 1-2 minutes.
The prepared mixture should be used within 30 minutes.
The grout is applied into joint gaps using a rubber trowel and excess material is scraped off.
Depending on weather conditions, clean the surface gently with a damp sponge after approximately 15-20 minutes without applying pressure.

Before application, clean dust, debris, and construction cement residues from joint gaps.
Pre-moisten the joints with a sponge before application.
Ensure that coverings have been applied at least 24 hours prior and that ceramic adhesive has cured.
Not suitable for application on metal surfaces.
No foreign materials should be added.
Do not apply in outdoor areas when rain is expected.
Protect from frost, sun, and strong winds for the first 24 hours after application.
Recommended application temperature is between +5 °C and +35 °C.
Wash all tools used after application with water before they dry.

Consumption varies between 100 – 800 g/m² depending on joint width and tile size.

Would You Like Us to Call You?

Joint Sealants

Comments

No comments yet. You can be the first filling the form below.