FLOOR 600 Surface Hardener
Cement based, quartz aggregate, surface hardening material containing special additives to increase compatibility with concrete.
Advantages
- Easy and fast to apply.
- High resistance to pressure, abrasion and cracking resistance.
- Provides a homogeneous and smooth surface.
- It provides labour saving by integrating quickly and easily into set concrete.
- It is resistant to external conditions and thermal differences.
Application Areas
It is used in all interior and exterior facades, in areas exposed to heavy loads such as factories, car parks, workshops, work areas, stations and service areas.
Application Features
- The concrete of the area to be applied must be at least C25 class.
- The surface of the fresh concrete to be applied should be polished with a tray trowel and levelled with a wooden trowel.
- When the concrete is ready for application, the appropriate amount of product is sprinkled on the surface and homogenously absorbed into the concrete by tray trowelling. Afterwards, the surface is made glossy by knife polishing to the desired extent.
Warnings and Recommendations
- Not applicable on metal surfaces.
- Absolutely no foreign ingredients should be added.
- It should not be applied in areas with high air circulation, in cases where frost is likely to occur within 24 hours after application.
- Application between ( + 5 °C) – ( + 35 °C) degrees is recommended.
- All tools used after application should be washed with water before drying.
Storage
| Packaging | 25 Kg Kraft Bag |
| Color | Grey, Red, Green |
| Shelf Life | 12 months from the date of production, provided that the packaging is not opened and damaged in a dry and humid environment. The packaging should be tightly closed when not in use. Packages should be protected from frost and sun. |
Technical Specifications and Performance Ratings
| Product Structure | Cement and Quartz Based Powder |
| Color | Grey, Red, Green |
| Reference Standard | TS EN 13813 |
| Compressive Strength | C40 |
| Flexural Strength | F7 |
| Abrasion Resistance | ≤3.2 cm³/50 cm² |
| Abrasion Resistance | ≤3,000 mg |
| Tensile Tensile Strength | ≥1,0 N/mm² |
| Impact Resistance | Class II |
| Capillary Water Absorption and Water Permeability | ≤0,1 kg/m²h0,5 |
| Fire Response Class | A1 |
Do You Want Us to Call You?
Comments
