DryFiX MS POLYMER Waterproofing is a superior waterproofing product based on MS Polymer developed with 100 Hybrid technology, featuring high elasticity. It has a hard elastic structure, is UV resistant, and waterproof. It is a new generation waterproofing material with a wide range of applications that can be easily applied on all types of surfaces.
Used for waterproofing terraces, roofs, and balconies; on building facades; in wet areas such as bathrooms, toilets, kitchens; on metal and wooden surfaces; foundation and retaining walls; on brick, tile, breeze block, Ytong, aerated concrete, galvanized, trapezoidal sheet, and corrugated or flat roof covering sheets.
Transparent and can be custom produced in any color. Ready to use, easily applied by brush or roller. Has high elasticity. Maintains elasticity in hot and cold climates, providing seamless waterproofing. Eliminates the risk of water leakage.
Surfaces to be treated must be free of all grease, dirt, and old waterproofing material residues. Cracks must be repaired with repair mortar and reinforced with mesh during application of DryFiX POLYMER 100. DryFiX POLYMER 100 should be diluted 1:1 with water and applied as a primer coat. Then, apply two coats of DryFiX POLYMER 100 by roller or brush without dilution. Allow primer to dry at least 1 hour. The waiting time between coats is 2 hours. Application temperature should be between +5°C and +30°C. Avoid application in frost or excessive heat. Reinforcement with mesh is recommended in high traffic or water pooling areas.
CONSUMPTION: 1 kg / m² (for 1 mm thickness)
COLOR: Standard transparent-white (custom colors available)
STORAGE CONDITIONS: Store unopened in original packaging in a dry and cool place.
SHELF LIFE: 12 months
PACKAGING: 18 kg PE bucket
