PRATİK Cement Based Machine Plaster

Advantages

• Allows fast and easy application by hand or machine.

• Has high adhesion to the applied surface. Does not sag or fall off.

• Spreads easily, providing a homogeneous finish on the applied surface.

• Has high compressive strength.

• Durable against outdoor climate conditions.

Application Areas

Applied on all cement-based surfaces, facades made of masonry elements such as brick, aerated concrete, and pumice.

Application Features

• DRYFIX PRATIK plaster material should be gradually added into 4.50-5.00 liters of clean water and mixed with a mixer until a homogeneous mixture is obtained.

• The prepared mixture should be rested for 5-10 minutes depending on weather conditions, then mixed again for 1-2 minutes to make it ready for use.

• For machine applications, adjust water volume accordingly and spray onto the surface.

Warnings and Recommendations

• Do not apply on metal surfaces.

• Do not add any foreign materials.

• The application surface must be cleaned from dust and dirt before application.

• Avoid application in moist, rainy, windy, or high temperature weather conditions.

• Do not apply on frozen, thawing, or surfaces at risk of rain or frost within 24 hours.

• Do not apply directly on surfaces such as wood, timber, or metal.

• Protect the application from frost, sun, and strong wind for the first 24 hours after application.

• Recommended application temperature is between +5 °C and +35 °C.

Storage

Consumption

14-16 kg/m² – 1 cm thickness

Technical Specifications and Performance Values