Rapid-Setting Water-Stopping Mortar – SHOCK

DRYFiX SHOCK is a rapid-setting cement-based water-stopping mortar developed for sealing active water leaks in concrete and other suitable cementitious substrates.

The product reacts rapidly upon contact with water, allowing active leaks to be sealed within seconds. Its ultra-fast setting properties make it suitable for emergency waterproofing repairs where conventional mortars cannot be applied effectively due to flowing water.

DRYFiX SHOCK provides strong adhesion to suitable substrates and forms a durable water-stopping repair when correctly applied.

ADVANTAGES

• Ultra-Fast Setting: Sets within 5–10 seconds, enabling rapid sealing of active water leaks.
• Emergency Water-Stopping: Stops running water through cracks, holes and cavities in concrete structures.
• Easy Application: Can be applied directly by hand using the recommended application procedure.
• Strong Adhesion: Provides excellent bonding to suitable cementitious substrates.
• Crack Resistance: Designed to provide a durable repair without surface dusting or cracking under suitable application conditions.
• Weather Resistance: Provides durable performance under external environmental conditions.

APPLICATION AREAS

DRYFiX SHOCK is suitable for emergency water-stopping applications on cement-based surfaces, including:

• Concrete foundations and foundation walls.
• Basement walls and below-ground structures.
• Concrete water tanks and reservoirs.
• Swimming pools.
• Water-leaking cracks and holes in concrete.
• Active water leaks in cementitious structures.
• Interior and exterior concrete surfaces exposed to water ingress.

APPLICATION INSTRUCTIONS

Preparation and Application

1. Wear suitable protective gloves before handling and applying the product.
2. Take a sufficient amount of DRYFiX SHOCK powder into your palm.
3. Press the material firmly against the active water leak using your palm and maintain pressure for approximately 5–10 seconds.
4. Apply a small additional amount of DRYFiX SHOCK over the repaired area and smooth the surface by hand.
5. A temperature increase at the application point indicates that the product's setting reaction has started.
6. After approximately 3–5 minutes, finish and smooth the repaired surface using a wire brush.

WARNINGS AND RECOMMENDATIONS

• Do not apply to metal, timber, brick or plastic surfaces.
• Not suitable for weak, unstable or moving areas around the leak.
• Ensure that the substrate is suitable and sufficiently sound before application.
• The ambient temperature during application and for the following 24 hours must remain between +5°C and +35°C.
• Do not add any foreign materials or additional additives to the product.
• Wear appropriate protective gloves and avoid direct skin contact.
• Follow the manufacturer's application instructions and safety recommendations.

STORAGE AND PACKAGING

PACKAGING: 5 kg plastic bucket.

COLOUR: Grey.

SHELF LIFE: 12 months from the date of manufacture when stored in unopened original packaging under the recommended storage conditions.

STORAGE CONDITIONS: Store in a dry environment, protected from moisture, frost and direct sunlight. Keep the packaging tightly sealed when not in use.

TECHNICAL SPECIFICATIONS