Two-component, cured with polyamide hardener, surface-tolerant epoxy primer containing anticorrosive zinc phosphate.
Used as a surface-tolerant epoxy primer on metal surfaces where sandblasting or sanding cannot be performed and light rust removal is not possible, only mechanical cleaning can be done. Suitable for working decks, hatch covers, scaffold and bridge legs, and industrial facility steels.
Color: White, Gray, Oxide Red, Oxide Yellow
Appearance: Matte
Thinner: Epoxy Thinner
Solid Content by Weight: 80%
Density: 1.60 g/cm³
Consumption: See consumption table.
Packaging: 21 kg Component A + 3 kg Component B: Total 24 kg
Flash Point: >25 °C
Mixing Ratio: 7:1
Application Methods: Brush, Roller, Air Spray, Airless Spray
Pot Life: 1 hour / 25°C
Shelf Life: 1 year
Inter-coat Waiting Time: 6 hours / 25°C
Drying Time: 12 hours / 25°C
Mechanical Strength: 7 days
Equipment Cleaning: Epoxy Thinner
SURFACE PREPARATION
Surfaces must be free from oil, grease, salt, dust, and dirt. High-pressure fresh water can be used if necessary. Paint flakes, oil residues, frost, dust, and debris that may prevent adhesion should be cleaned. Old painted surfaces should be abraded.
MIXING PREPARATION
Components A and B must be mixed at specified ratios and stirred homogeneously with a low-speed mixer for at least 3-4 minutes. After mixing, the product is ready for application.
COATING SYSTEM
Pay special attention to bolt heads, weld seams, and sharp edges during application of the prepared primer. Apply a dry film thickness of 40 microns per coat.
APPLICATION CONDITIONS
Do not apply under 10 °C, above 45 °C, or in environments where relative humidity exceeds 80%.
SAFETY
This product is for professional use. Read the safety warnings on the packaging before use and consult the Material Safety Data Sheet if necessary. Avoid inhalation, skin and eye contact, and ingestion. Use appropriate safety equipment. Take necessary precautions against fire, explosion, and environmental pollution. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* Store the product between 5-35°C.
* Protect from direct sunlight.
* Keep opened product tightly sealed in its original packaging.
