TRACK R2 Cement Based Repair Mortar

Advantages

• Easy to apply.

• Provides high adhesion on all cement-based surfaces.

• Suitable for use on both horizontal and vertical areas.

• Short curing time ensures fast service opening. High early and final compressive strength.

• Highly resistant to thermal changes. Does not cause corrosion due to special formulation.

• High crack resistance.

Application Areas

Provides repair up to 5 mm on all cement-based surfaces, prior to ceramic and plaster-like applications.

Application Features

• Add 4.00-4.50 liters of water slowly into a 25 kg bag while mixing with a mixer for 2-3 minutes. After resting for 2 minutes, mix again for 1-2 minutes.

• Use the prepared mixture within 30 minutes.

• Apply to cement-based structural elements horizontally or vertically with a trowel.

• The application surface must be cleaned from dust and dirt before application.

• The area to be repaired should be slightly moistened before application.

• Maximum application thickness per layer is 5 mm. Wait at least 3 hours between layers.

Warnings and Recommendations

• Do not apply on metal surfaces.

• Do not add any foreign materials.

• Do not apply outdoors if rain is expected.

• Protect the application from frost, sun, and strong wind for the first 24 hours after application.

• Recommended application temperature is between +5 °C and +35 °C.

• Wash all tools used immediately with water before they dry.

Storage

Consumption

For 1 mm thickness: 1.9 – 2.0 kg/m²

Technical Specifications and Performance Values