Epoxy paint is a high-durability, high-gloss coating obtained by combining a polymer called epoxy resin with special pigments. Due to these properties, it is frequently preferred for industrial and decorative purposes.
Epoxy paint is an ideal choice for those seeking a high-performance, durable, and aesthetic coating solution. Being a two-component system, epoxy creates an extremely strong and long-lasting surface when applied as a mixture of resin and hardener. Epoxy paints are widely used in many areas from industrial facilities to homes, hospitals to schools. They offer high resistance to chemicals, abrasion, and impact. They also stand out due to their hygienic nature, ease of cleaning, and availability in various colors and patterns.
Topcoat Epoxy Paint DFC 310
Dryfix DFC 310 is a two-component, solvent-free epoxy resin-based topcoat designed to create a slip-resistant, smooth, and durable surface on industrial floors. Its easy application provides a practical solution. It is frequently preferred in industrial areas on floors or walls. DFC 310 stands out with excellent adhesion, resistance to chemicals and abrasion, long lifespan, and aesthetic appearance.
Advantages
Excellent chemical resistance, abrasion and wear resistance, seamless surface formation, easy cleaning, hygienic, low maintenance, easy application, solvent-free.
Application Features
- Solvent-free.
- High mechanical strength.
- Liquid impermeable.
- Glossy surface finish.
- Easy to apply.
- Easy to clean and maintain.
- Slip-resistant surface can be achieved.
Application Areas
The solvent-free epoxy topcoat paint with high mechanical strength and abrasion resistance and easy cleaning can be safely used in many industrial areas and all environments where hygiene is important (including surfaces with plaster application) such as factories, assembly workshops, warehouses, aircraft hangars, stores, parking lots, food facilities, water tanks, hospitals, chemical and pharmaceutical industries, energy plants. It is an ideal solution especially for vertical floor surfaces.
Storage
| Packaging | 17 kg + 3 kg / Set |
| Color | Component A RAL Colors – Component B Transparent |
| Shelf Life | Can be stored unopened in original containers for at least 12 months in dry environments at temperatures between 5°C and 25°C. Containers of unmixed components must be tightly closed to prevent air exposure for next use. |
Consumption
Minimum total consumption: Approx. 600 gr/m²
Application Instructions
Surface Preparations
Substances weakening adhesion forces such as oil, wax, grease, water repellents, loose easily removable particles, and dust must be removed by grinding machine. New concrete must be at least 28 days old. The surface must be primed before application. Concrete surfaces to be coated should meet at least the following standards:
- Hardness: R28 = 15 MPa
- Temperature: 10-30°C
- Surface Moisture: < 4%
Mixing Preparation
Component A and Component B come in separate packages with predetermined mixing ratios. Component B is completely poured into Component A and mixed. Mixing should be done with a mixer at 300 rpm. Being a two-component product, it should be prepared in the specified mixing ratio in quantities to be consumed considering pot life. The product temperature must be above 15°C for homogeneous mixing. Component A should be quickly mixed mechanically, then the hardener (Component B) added carefully. Mix Components A and B mechanically for at least 3 minutes until homogeneous. Use the prepared mixture within the pot life.
Application
The prepared mixture is applied with a short-haired roller in both directions. During application, the relative humidity of air must be maximum 80%, and the application temperature (ambient and surface) should be between +10°C and +30°C. Outdoor applications must be rain-free 24 hours before, during, and 24 hours after application. Floor temperature must be at least 3°C above the dew point. Applied surfaces must be protected for at least 24 hours. The material reaches its mechanical values approximately in 7 days as per technical data sheet.
Technical Specifications and Performance Values
| Color | Component A RAL Colors – Component B Transparent |
| Density | Component A: 1.70 ± 0.1 g/cm³ Component B: 1.0 ± 0.1 g/cm³ |
| Hardness (7 days) | 75 Shore D |
| Viscosity (Mix) | 1500 cP |
| Mixing Ratio (A+B) | 19+5 by weight |
| Abrasion Resistance (7 days) | 30-35 mg |
| Compressive Strength | 50 (N/mm²) |
| Flexural Strength | 20 (N/mm²) |
| Adhesion to Concrete | 1.5 (N/mm²) |
| Pot Life | 40-60 min |
